一、产品简介 Introduction
产品名称：磷酸铁锂专用添加剂 Name: Lithium Iron Phosphate Specifical Additives
产品型号：ADD-M Product: ADD-M
选用电导率高的材料以及天然优质石墨，经特殊工艺处理成纳米级的超细粒子，均匀分散于水介质中成为乳液。
Nano ultrafine particles are obtained by selecting high conductivity materials and natural graphite as the raw materials through a specific treatment procedure and further dispersed in an aqueous medium to form an emulsion.
二、技术指标 Technical Index
三、产品用途 Product Usage
作为专用添加剂添加到制备磷酸铁锂正极材料前驱体中。建议的使用量为1.0-3.0%。
As specifical additive added to the anode material precursor of lithium iron phosphate. Recommended usage is 1.0-3.0 %.
四、产品特点 Product Features
1、超微离子，形成导电网络，可显著提高材料的电子导电性和锂离子的跃迁速度，改善电池的低温、倍率性能以及循环寿命。
Ultrafine partparticles are easily form conductive network, which can significantly enhance the electronic conductivity of materials and the transition rate of lithium ion and further improve low temperature, rate capability performance and cycle life of batteries.
2、石墨粒子颗粒流动性好，易于分散，涂布中表现优异的加工性能，也能显著提高极片的压实密度，有效增加了电池的能量密度。
Graphite particles have good mobility and dispersion, which not only leads to excellent processing performance in coating performance, but also can significantly improve the packing density of the pole pieces and effectively increase the energy density of batteries.
3、最佳的粒度分布，使得导电性能优异，可减少其它导电物质的使用，增加活性物质的用量，有效提高了正极材料的克容量，还能显著降低电池内阻，提高活性物质利用率。
Optimum particle size distribution can reduce the use of other conductive materials, increase the amount of the active material, effectively improve the gram capacity of the anode material, further reduce the battery internal resistance and enhance the utilization of the active material.
4、稳定的乳液分散效果，避免干粉微粒的团聚现象，使得材料使用中能保持很好的一致性和电池性能的稳定性。
Stable emulsion dispersion can avoid dry particulate agglomeration and make battery to maintain good consistency and stability.
五、注意事项 Cautions
运 输：适用于各种运输途径，防日晒雨淋，运输途中，包装袋上方防止重压。
Transport: Suitable for all kinds of transportation, far away from sunshine and rain, and avoid high pressure above package in transit.
规 格： 25Kg/桶
Specifications：25 kg/barrel
存 储：环境温度-5至35℃，相对湿度不大于75%的洁净、干燥室内，不能暴露于腐蚀性气体中，即 开即用，避免开封吸潮。
Storage: Stored in clean and dry places where environment temperature is between -5℃ and 35℃ and relative moisture is no more than 75%. Avoid exposure to corrosive gas and absorption of moisture out-of-the-box.
保质期：产品保质期12个月。
Warranty: 12 months.